Hot Racing SJT257 Steel Spur Gear (57t 0.8 Mod)(Red) - Traxxas
Hot Racing 57 tooth, 32 pitch (0.8 Mod) spur gear for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, and Summit
- CNC machined and lightened hardened steel construction
- Black oxide coating for durability and corrosion resistance
- Red anodized countersunk washers
- Three (3) mounting screws
- Three (3) red anodized countersunk washers
- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
- Number of Teeth: 57
- Gear Pitch: 32 pitch (0.8 module)
- Mounting Holes: 3
- Tooth Face width: 6mm (0.24 inch)
- Internal diameter: ~11mm (~0.43 inch)
- Hardened clutch bell or pinon gear
- Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.
FEATURES:
- Black oxide coating for durability and corrosion resistance
- Red anodized countersunk washers
YOU WILL RECEIVE:
- 57 tooth 32 pitch (0.8mod) spur gear- Three (3) mounting screws
- Three (3) red anodized countersunk washers
- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
SPECIFICATIONS:
- Gear Pitch: 32 pitch (0.8 module)
- Mounting Holes: 3
- Tooth Face width: 6mm (0.24 inch)
- Internal diameter: ~11mm (~0.43 inch)
REQUIREMENTS:
- Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.
Brand | Hot Racing |
---|---|
MPN | SJT257 |
Part Type | Pinion Gear (0.8 Mod/32P) |
Eligible for Free Shipping | No |
Write Your Own Review
More from Hot Racing